Epson PX535F list error codes with quick guides
– Compatible Printer model: Epson PX535F
– Epson PX535F Error Codes with quick guides:
- Code: 01H
- Description: CR PID excess load error
- Causes: • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Cable disconnection • Main Board failure (Motor driver failure)
- Code: 02H
- Description: CR PID excess speed error
- Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)
- Code: 03H
- Description: CR PID reverse error
- Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Some external force is applied to the printer such as stopping the CR Unit during printer operation, vibration or the like. • Tooth skip of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure)
- Code: 04H
- Description: CR PID lock error
- Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Cable disconnection • Main Board failure (Motor driver failure)
- Code: 08H
- Description: CR load position reverse error
- Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)
- Code: 09H
- Description: CR load position excess speed error
- Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure)
- Code: 0AH
- Description: CR load position excess load error
- Causes: • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, Change Lever failure) • Cable disconnection • Main Board failure (Motor driver failure)
- Code: 10H
- Description: Home position detection error
- Causes: • CIS Module failure • Scanner Housing Upper failure (home seek pattern is dirty) • Scanner Housing Lower failure (the rack section is damaged) • Scanner Motor failure • Insufficient grease • Foreign object • FFC disconnection/failure • Main Board failure
- Code: 14H
- Description: Measurement error
- Causes: • Scanner Motor failure • Insufficient grease • Foreign object • Gear failure • Deformation of the shaft
- Code: 20H
- Description: LED lightning error
- Causes: • CIS Module failure • Foreign object • Scanner Housing Upper failure (white standard pattern is dirty) • Main Board failure
- Code: 36H
- Description: Paper jam error
- Causes: • Paper jam • Loading/ejecting papers out of the standard range or curled papers • Using long papers (Legal or longer)
- Code: 40H
- Description: Transistor temperature error
- Causes: • Main Board failure
- Code: 41H
- Description: X-Hot detect error (pre printing)
- Causes: • Printhead failure • Main Board failure
- Code: 42H
- Description: X-Hot detect error (after flushing)
- Causes: • Printhead failure • Main Board failure
- Code: 43H
- Description: Head temperature error
- Causes: • Printhead failure • Main Board failure
- Code: 50H
- Description: Home position error
- Causes: • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam
- Code: 56H
- Description: Contact error at ink replacement timing (Power-off)
- Causes: • Foreign object • Ink Cartridges are not installed correctly • Paper jam
- Code: 5BH
- Description: Insoluble paper jam error
- Causes: • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam
- Code: 80H
- Description: Circuit error (include blowout of a fuse)
- Causes: • Main Board failure
- Code: 83H
- Description: Reflector no reflection error
- Causes: • Defective Fault Detection Plate* (detachment, peeled reflector) • Sensor failure (contaminated Sensor, damaged FFC, PIS Board installation failure)
- Code: 88H
- Description: Excessive Light error
- Causes: • Abnormal sensor output (Sensor failure, PIS Board failure) • Unexpected excessive amount of light such as too much diffused light from outside is shed on the sensor because the housings are removed. (When used outdoors or near the window where direct sunlight comes in)
- Code: 89H
- Description: Insufficient Light error
- Causes: • Sensor failure (PIS Board installation failure, contaminated Sensor) • Abnormal sensor output (Break of FFC during printer operation, PIS Board failure) • Unable to accurately detect where the fault detection plate is because too much diffused light from outside is shed on the sensor. (When used outdoors or near the window where direct sunlight comes in) • Ink Cartridge failure (contaminated/damaged prism)
- Code: B0H … CFH
- Description: Ink device error
- Causes: • Ink Cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure
- Code: D1H
- Description: CR (PID) driving time error
- Causes: • Main Board failure (Firmware failure)
- Code: D2H
- Description: CR (load position) driving time error
- Causes: • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)
- Code: D3H
- Description: PF (PID) driving time error
- Causes: • Main Board failure (Firmware failure)
- Code: D4H
- Description: PF (BS) driving time error
- Causes: • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)
- Code: F1H
- Description: PF PID excess load error
- Causes: • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection • Main Board failure (Motor driver failure)
- Code: F2H
- Description: PF PID excess speed error
- Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure)
- Code: F3H
- Description: PF PID reverse error
- Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Paper jam • Paper is pulled out from the ASF side when paper is fed • Main Board failure (Motor driver failure)
- Code: F4H
- Description: PF PID lock error
- Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Cable disconnection • Main Board failure (Motor driver failure)
- Code: F8H
- Description: PF load position reverse error
- Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt
- Code: F9H
- Description: PF load position excess speed error
- Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure)
- Code: FAH
- Description: PF load position excess load error
- Causes: • PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection
Solve Epson PX535F Error codes
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here
Contact us to get support with Epson PX535F Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
