Epson AcuLaser M2300 list error codes with quick guides
– Compatible Printer model: Epson AcuLaser M2300
– Epson AcuLaser M2300 Error Codes with quick guides:
- Code: E001
- Image:
- Description: Main Board EEPROM error
The EEPROM (U800) on the Main Board Assy. is inaccessible. - Causes: Mounting failure of the EEPROM (U800). The Main Board Assy. is faulty. EEPROM (U800) is faulty.
- Code: E002
- Image:
- Description: Main motor error
The main motor ready signal could not be detected within 2 seconds after the motor becomes ON. - Causes: Poor connection between the main motor (CN1) and the Main Board Assy. (YC805). There is some problem in the main motor drive transmission path. The main motor is faulty. The Main Board Assy. is faulty.
- Code: E004
- Image:
- Description: Polygon motor error
The polygon motor ready signal could not be detected within 6 seconds after the motor becomes ON. - Causes: Poor connection between the polygon motor (laser scanner unit) and the Main Board Assy. (YC819). The laser scanner unit is faulty. The Main Board Assy. is faulty.
- Code: E005
- Image:
- Description: Horizontal synchronization signal error
The controller could not detect the horizontal synchronization signal within the specified time period. - Causes: The laser scanner unit is faulty.
- Code: E008
- Image:
- Description: Fuser heater cable disconnection
The fuser heater lamp was turned ON, but the fuser temperature did not rise. - Causes: Poor connection of the fuser thermistor. Poor connection of the fuser heater lamp connector. Mounting failure of the fuser thermistor. Fuser thermal cut-out has been activated. Mounting failure of the fuser heater lamp. The fuser heater lamp has breaks.
- Code: E009
- Image:
- Description: Abnormally high fuser heater temperature
The fuser thermistor detected abnormal high temperature. - Causes: The fuser thermistor shorted out. The Main Board Assy. is faulty.
- Code: E010
- Image:
- Description: Fuser thermistor short-circuit
The A/D value input from the fuser thermistor is “0” (zero). - Causes: Poor connection of the fuser thermistor. The fuser thermistor has breaks. Mounting failure of the fuser thermistor. Fuser thermal cut-out has been activated. Mounting failure of the fuser heater lamp. The fuser heater lamp has breaks.
- Code: E011
- Image:
- Description: Zero cross signal error
The Main Board Assy. did not receive the zero cross signal during a specified time period. - Causes: Poor connection between the HVPS (YC202) and the Main Board Assy. (YC811). Poor connection between the LVPS (YC103) and the HVPS (YC201). The LVPS is faulty. The Main Board Assy. is faulty.
- Code: E016
- Image:
- Description: Option cassette unit communication error
The communication between the Main Board Assy. and the PF main board of the option cassette unit cannot be established. - Causes: Mounting failure of the option cassette unit. Poor connection between the Main Board Assy. (YC818) and the PF interface connector. The Main Board Assy. is faulty. Poor connection between the PF main board (YC5) and the PF interface connector. The PF main board is faulty.
- Code: E998
- Image:
- Description: Engine communication error
Communication error between the controller on the Main Board Assy. and the engine controller. - Causes: The firmware of the engine controller is faulty. The Main Board Assy. is faulty.
Solve Epson AcuLaser M2300 Error codes
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here
Contact us to get support with Epson AcuLaser M2300 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
