Epson AcuLaser C2600 list error codes with quick guides

Epson AcuLaser C2600 list error codes with quick guides

– Compatible Printer model: Epson AcuLaser C2600
– Epson AcuLaser C2600 Error Codes with quick guides:

• Code: C0017
• Description: CPU error (undefined interruption)
• Troubleshooting Guides: Controller Board

• Code: C0081
• Description: CPU error (TLB modification exception)
• Troubleshooting Guides: Controller Board

• Code: C0082
• Description: CPU error (TLB miss exception [Load/Fetch])
• Troubleshooting Guides: Controller Board

• Code: C0083
• Description: CPU error (TLB miss exception [Store])
• Troubleshooting Guides: Controller Board

• Code: C0084
• Description: CPU error (address error exception [Load/Fetch])
• Troubleshooting Guides: Controller Board

• Code: C0085
• Description: CPU error (address error exception [Store])
• Troubleshooting Guides: Controller Board

• Code: C0086
• Description: CPU error (bus error exception [Fetch])
• Troubleshooting Guides: Controller Board

• Code: C0087
• Description: CPU error (bus error exception [Load/Store])
• Troubleshooting Guides: Controller Board

• Code: C0088
• Description: CPU error (SYSCALL exception)
• Troubleshooting Guides: Controller Board

• Code: C0089
• Description: CPU error (Break exception)
• Troubleshooting Guides: Controller Board

• Code: C0090
• Description: CPU error (reserving command exception)
• Troubleshooting Guides: Controller Board

• Code: C0091
• Description: CPU error (unused coprocessor exception)
• Troubleshooting Guides: Controller Board

• Code: C0092
• Description: CPU error (FPU exception)
• Troubleshooting Guides: Controller Board

• Code: C0093
• Description: CPU error (TLB exception)
• Troubleshooting Guides: Controller Board

• Code: C0094
• Description: CPU error (XTLB exception)
• Troubleshooting Guides: Controller Board

• Code: C0095
• Description: CPU error (cache exception)
• Troubleshooting Guides: Controller Board

• Code: C0096
• Description: CPU error (Trap exception)
• Troubleshooting Guides: Controller Board

• Code: C0097
• Description: CPU error (FPU exception)
• Troubleshooting Guides: Controller Board

• Code: C0098
• Description: CPU error (watch exception)
• Troubleshooting Guides: Controller Board

• Code: C0128 … C0254
• Description: CPU error (undefined trap)
• Troubleshooting Guides: Controller Board

• Code: C0255
• Description: CPU error (NMI exception)
• Troubleshooting Guides: Controller Board

• Code: C0256
• Description: CPU error (divide by 0)
• Troubleshooting Guides: Controller Board

• Code: C0257
• Description: CPU error (arithmetic overflow)
• Troubleshooting Guides: Controller Board

• Code: C0258
• Description: CPU error (break occurrence)
• Troubleshooting Guides: Controller Board

• Code: C0800
• Description: IPL error (controller defect)
• Troubleshooting Guides: Controller Board. Program DIMM

• Code: C0998
• Description: Engine communication error (only when power-on)
• Troubleshooting Guides: Controller Board. Video I/F Cable. Engine Controller Board

• Code: C1000
• Description: Standard RAM error (not installed, etc.)
• Troubleshooting Guides: Std. RAM DIMM

• Code: C1001
• Description: Standard RAM error (standard stack is undefined, etc.)
• Troubleshooting Guides: Std. RAM DIMM

• Code: C1002
• Description: Standard RAM error (standard size is undefined, etc.)
• Troubleshooting Guides: Std. RAM DIMM

• Code: C1020
• Description: RAM error (slot 0)
• Troubleshooting Guides: Std. RAM DIMM

• Code: C1021
• Description: RAM error (slot 1)
• Troubleshooting Guides: Opt. RAM DIMM

• Code: C1022
• Description: RAM error (slot 2)
• Troubleshooting Guides: Opt. RAM DIMM

• Code: C1400
• Description: Engine initialization error
• Troubleshooting Guides: Engine Controller

• Code: C1700
• Description: Built-in network hard ware error
• Troubleshooting Guides: Network Board

• Code: C1720
• Description: Network board uninstalled
• Troubleshooting Guides: Network Board

• Code: C1999
• Description: Other hardware errors
• Troubleshooting Guides: Controller Board

• Code: C2000
• Description: Software error
• Troubleshooting Guides: Program DIMM

• Code: C999
• Description: Engine flash ROM has no program data
• Troubleshooting Guides: Program DIMM

• Code: E090
• Description: Inconsistent patch sensing
• Troubleshooting Guides: 1 Open and close the Cover D to clean the density sensor. 2 Check the connection status between the Density Sensor (Transfer Unit, Assy., ASP) and the MCU. [TRANSFER UNIT, Assy., ASP] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN110) Inspect the sensor cleaner on the transfer unit for any abnormality. 3 Replace the [TRANSFER UNIT, Assy., ASP]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E091
• Description: Low voltage power supply error
• Troubleshooting Guides: 1 Check the connection status between the LVPS and the MCU. [POWER SUPPLY] (P13) – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN103) [POWER SUPPLY] (P12) – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN109) 2 Replace the [POWER SUPPLY]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E092
• Description: Blown fuser fuse
• Troubleshooting Guides: 1 Check the connection status between the Fuser Unit and the MCU. [Fuser unit] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN109) 3 Replace the [Fuser unit]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E093
• Description: Blown photoconductor unit fuse
• Troubleshooting Guides: 1 Check the connection status between the Photoconductor Unit and the MCU. [Photoconductor unit] – [ELECTRODE Assy., PC] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN108) 2 Replace the Photoconductor Unit. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

Solve Epson AcuLaser C2600 Error codes

• Code: E094
• Description: Printer thermistor error
• Troubleshooting Guides: 1 Check the connection status between the sensor and the MCU. [DETECTOR, HUMIDITY] – [BOARD ASSY., MAIN C585 MCU] (CN127) 2 Replace the [DETECTOR, HUMIDITY]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E095
• Description: HSYNC error
• Troubleshooting Guides: 1 Check the connection status between the LSU and the MCU. [Laser Scanner] – [HARNESS, LSU] – [BOARD ASSY., MAIN C585 MCU] (CN120) 2 Replace the [Laser Scanner]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E096
• Description: VSYNC error
• Troubleshooting Guides: 1 Check the connection status between the sensor and the MCU. [TRANSFER UNIT, Assy., ASP] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN110) 2 Check the flag for detecting VSYNC (convex portion) on the extreme right of the Transfer Belt for any abnormality. 3 Replace the [TRANSFER UNIT, Assy., ASP]. 4 Check the connection status between the Motor and the MCU. [SERVOMOTOR, PC] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN105) 5 Replace the [SERVOMOTOR, PC].

• Code: E111
• Description: Optional feeder drive motor error
• Troubleshooting Guides: 1 Check the connection status for the all connections between the Motor and the MCU. [DC MOTOR, OP] – [HARNESS, CASSETTE, MOTOR] – [BOARD ASSY., SUB C585 SUB] (CN403) – [BOARD ASSY., SUB C585 SUB] (CN401) – [HARNESS, CASSETTE] – [CONNECTOR, OP] – [HARNESS, PAPER LOAD] – [BOARD ASSY., MAIN C585 MCU] (CN116) 2 Replace the [DC MOTOR, OP]. 3 Replace the [BOARD ASSY., SUB C585 SUB]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E112
• Description: Photoconductor drive motor error
• Troubleshooting Guides: 1 Check the connection status between the Motor and the MCU. [SERVOMOTOR, PC] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN105) 2 Replace the [SERVOMOTOR, PC]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E113
• Description: Rotary drive motor error
• Troubleshooting Guides: 1 Check the connection status between the Motor and the MCU. [DRIVE ASSY., RT, ASP] – [BOARD ASSY., DRV, C585 DRV] (CN212) – [BOARD ASSY., DRV,C585 DRV] (CN210, CN251) – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN104, CN122) 2 Remove the rear cover of the printer to let the printer perform initializing operation, and check if the rotary lock lever operates normally. 3 Check the connection status between the Rotary Lock Unit and the MCU. [LOCK ASSY., RT] – [BOARD ASSY., DRV, C585 DRV] (CN213) – [BOARD ASSY., DRV, C585 DRV] (CN210, CN251) – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN104, CN122) 4 Replace the [LOCK ASSY., RT]. 5 Remove the rear cover to let the printer perform initializing operation, and check if the rotary stops at its home position. 6 Check the connection status between the Rotary HP Sensor and the MCU. [DETECTOR, PC] – [HARNESS, HP] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN108)

• Code: E115
• Description: Main drive motor error
• Troubleshooting Guides: 1 Check the connection status between the Motor and the MCU. [SERVOMOTOR, DRIVE] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN123) 2 Check the paper feed path for remaining papers. 3 Remove the MCU Board and rotate the motor with your hand to check if the motor rotates normally without any interference. 4 Check if the roller and gear of the Fuser Unit are damaged. 5 Replace the [SERVOMOTOR, DRIVE]. 6 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E116
• Description: Scanner motor error
• Troubleshooting Guides: 1 Check if the starting sound of the motor is audible. 2 Check the connection status between the LSU and the MCU. [Laser Scanner] (P204) – [HARNESS, LSU] – [BOARD ASSY., MAIN C585 MCU] (CN118) 3 Replace the [Laser Scanner]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E123
• Description: Large temperature change
• Troubleshooting Guides: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E124
• Description: Abnormally high temperature
• Troubleshooting Guides: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E125
• Description: Abnormally low temperature 2
• Troubleshooting Guides: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E126
• Description: Abnormally low temperature 1
• Troubleshooting Guides: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E132
• Description: Inconsistent engine controller memory
• Troubleshooting Guides: 1 Check the FRAM Board for the connection status. Check if the connector is securely connected. 2 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E144
• Description: Transfer belt unit end of life
• Troubleshooting Guides: 1 Replace the [TRANSFER UNIT, Assy., ASP], and the reset the life counter.

• Code: E153
• Description: Ozone fan error
• Troubleshooting Guides: 1 Check the connection status between the Fan and the MCU. [FAN, PC] – [HARNESS, PAPER LOAD] – [BOARD ASSY., MAIN C585 MCU] (CN114) 2 Replace the [FAN, PC]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E154
• Description: Toner fan error
• Troubleshooting Guides: 1 Check the connection status between the Fan and the MCU. [FAN, DUST CHAMBER] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN107) 2 Replace the [FAN, DUST CHAMBER]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E155
• Description: Fuser fan error
• Troubleshooting Guides: 1 Check the connection status between the Fan and the MCU. [FAN, FU] – [BOARD ASSY., MAIN C585 MCU] (CN106) 2 Replace the [FAN, FU]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E156
• Description: Power supply fan error
• Troubleshooting Guides: 1 Check the connection status between the Fan and the MCU. [FAN, LPS] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN107) 2 Replace the [FAN, LPS]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E256
• Description: Transfer Belt unit lever out-of-position
• Troubleshooting Guides: 1 Check if the photoconductor lock lever is set to printing position. 2 Check the connection status between the sensor and the MCU. [TRANSFER UNIT, Assy., ASP] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN110) 3 Check the flag for detecting VSYNC (convex portion) on the extreme right of the Transfer Belt for any abnormality. 4 Replace the [TRANSFER UNIT, Assy., ASP]. 5 Check the connection status between the Motor and the MCU. [SERVOMOTOR, PC] – [HARNESS, MAIN] – [BOARD ASSY., MAIN C585 MCU] (CN105) 6 Replace the [SERVOMOTOR, PC].

• Code: E998
• Description: Engine communication error
• Troubleshooting Guides: 1 Check the firmware version of both of the Engine and the Main controllers and update them as necessary. 2 Check the connection status between the MCU and the Main controller. [BOARD ASSY., MAINC585 MCU] (CN101, CN121) – [HARNESS, MAIN, SIGNAL] – [BOARD ASSY., MAIN, C585 MAIN] (CN201, CN252) 3 Replace the [BOARD ASSY., MAIN C585 MCU]. 4 Replace the [BOARD ASSY., MEMORY, C533 PROG (59571)]. 5 Replace the [BOARD ASSY., MAIN, C585 MAIN].

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here

Contact us to get support with Epson AcuLaser C2600 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.